Installing the CM10.1 M1 build for Samsung Galaxy Tab2 10.1 GSM
edition is easy and you can do it by following the instructions that I
have listed in this post. Make sure to read the entire post that I’ve
listed below and you shouldn’t have any problems completing the
installation.
The CM 10.1 M1 is the first milestone of the Nightly builds, and it
should be much more stable than those nightlies. It is based on the
Android 4.2.1 which means that it comes with all the Jelly Bean new
features and functions. It is a ROM that can be installed over any
Android 4.1.x / 4.2.x Jelly Bean versions and it gets rid of all the
bloatware from your phone besides the fact that it install the most
popular custom Android OS, which is the CyanogenMod 10.1.
In order to correctly flash this installation you will first have to read the preparation guide below:
- It is a guide that will work only with the GSM version of Samsung Galaxy Tab 2 10.1 model number p5100.
- Install the custom ROM only if your device is rooted and running a custom Recovery mode such as ClockworkMod. If your tablet doesn’t meet these requirements then you will have to return to this post when the tablet is rooted and CWM Recovery installed.
- Backup all your important data by moving it on to your device’s internal SDcard or directly to your computer. Also, you can choose to store it using ‘cloud’ services such as dropbox, mediafire, box, drive etc.
- Create a full ROM backup using the CWM Recovery mode. This will be your device’s restore point in case something doesn’t go as planned and you brick the tablet. The chances for that happening are very slim but you should take the worst scenario into consideration. NOTE: If you already run a custom ROM that is based on CM 10.1 then you can install the M1 build over it without wiping data or creating backups.
- This is a guide for advanced users, but if you carefully follow the instructions then you should complete the install even if you’re a novice.
- Enable USB debugging option.
- Charge the tablet’s battery until its power level reaches at least 50% so that the device won’t power off during the installation.
- We cannot be blamed in case something goes wrong and you lose data or you brick the phone.
- Read all the info and only when you’re sure that you can complete the install you should get to the tutorial guide.
- Make sure that you won’t skip any instructions that I have listed below.
How to flash CM 10.1 M1 ROM for Samsung Galaxy Tab 2 10.1 p5100 GSM:
- Download the ROM zip from HERE. Save the file on your PC and don’t unzip its contents.
- Download the Gapps for CM10.1 M1 from HERE. This has to be installed so that you’ll get the Google applications installed on your PC.
- Connect the tablet to computer and move the downloaded files on its internal SD card. When the files are moved you can unplug the Galaxy Tab 2 device from PC and after that proceed to power it off.
- Boot the tablet into CWM Recovery mode by pressing Volume Down and Power at the same time. When the custom Recovery menu appears you can release the buttons.
- If you don’t have a backup of your current ROM, then you should select ‘backup and restore’ option. Create a backup and then you can get to the next step. NOTE: If you have a backup then you can skip this step.
- Now, select ‘wipe data/ factory reset’ option and confirm the process. NOTE: If your device is already running a CM 10.1 ROM then you can skip this step and proceed directly to the installation steps.
- Select ‘install zip from sdcard’ and then ‘choose zip from sdcard’. Find the CyanogenMod 10.1 M1 zip and select it for installation. Confirm.
- Next, select again ‘choose zip from sdcard’ when the ROM installs. Find the ‘Gapps’ file and install it.
- Return to the main menu of CWM Recovery and then select ‘reboot system now’.
- Wait for the first boot process to complete. This shouldn’t take more than 4-5 minutes.
- Enter the Google Account details and then you can take control over all the CyanogenMod 10.1 OS functions.
- Test the ROM and please report any bugs or errors, that you might find, to our comments section.
NOTE: In case the first boot process takes over 10 minutes or your device has entered a boot loop, then you will have to power off the Galaxy Tab 2 10.1 completely. After that you will be forced to repeat the entire tutorial starting with step 4 and the second time the ROM should install successfully.
If you have any other questions, then you should post them in our comments section and we will try to come up with a solution for all your problems.
If you don’t like this new ROM, then you can use the CWM Recovery and then restore the NANDROID backup of the previous ROM.
0 comments:
Post a Comment