After waiting for what seemed to be ages for the official Android 4.0
ICS update for the Samsung Galaxy S II we can now assume that there are
still a couple of users out there who are not happy with their Galaxy S
II after the recent update. If you happen to be one of them, you should
read this article with a lot of interest as it presents an easy and as
risk free as possible to update your Galaxy S II to a custom firmware
that improves on the official Samsung Android 4.0 ICS release. The
custom firmware in question here is the Bezke UltraICS 4.0 which not
only improves but also adds some fine touches to the official ICS
Android 4.0.3 XXLPQ release.
Updating your Galaxy S II with the Bezke UltraICS ROM will void your
warranty, so if you still want to keep it you should not follow this
guide. The only issue that remains to be covered before we start this
guide is the disclaimer, so please read carefully the following words:
This software is not our own creation and as such, you cannot hold us
responsible for any damage that might occur to your device by following
the procedures in this guide. However, we will try to help you sort out
any glitches or problems that might arise by following the steps in this
guide to the extent our knowledge limits us. With this being said,
please try not to worry so much because the updating procedure has been
thoroughly tested before release.
The first part of this tutorial is actually aimed at making sure you
can apply this custom ROM. Before proceeding any further you need to
have already updated your Samsung Galaxy S II to the official ICS
release, which has the firmware codename of XXLPQ. If you are already on
the latest firmware be sure to root your device before following this
guide.
The next part of this tutorial is going to present the backing up
process that should be applied to all your personal data stored on the
Galaxy S II. every custom made update applied to an Android running
device will result in the permanent deletion of all the personal data
stored. With this in mind we will be using some third party apps and
procedures to make sure your personal stuff stays intact. Below you will
also some find some requirements related to your device and computer,
and unless you fancy making a new brick with this procedure, you should
follow them:
- You need to be running a rooted ROM on your Galaxy S II and you also need to have a custom recovery installed.
- Text messages – Install this app: SMS Backup & Restore
- Phone Contacts – These can be synced via your Gmail/Google account or by exporting them to the micro SD card
- Call Log – Install this app: Call Log Backup and Restore
- Pictures, Music, Videos, Files etc.– Copy to internal memory card
- Internet & MMS Settings – Backup all the settings from this path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
- You need to charge your device to full or to a minimum of 60% to ensure that the phone will not power off during the install process.
- Enable the USB debugging in your Samsung Galaxy S II. This can be done from the following: Settings > Applications > Development > USB debugging. The USB Debugging option should be ticked.
- Turn off or disable any anti virus or security software running on your PC because it may have a negative impact on update. If you happen to use an anti virus in your Samsung Galaxy S II be sure to uninstall or disable it as well.
- The first step will begin with the download of this Bezke Ultra ICS Package to your computer.
- The next step will involve copying the downloaded Zip the root of your Samsung’s Galaxy S II inbuilt memory. Be sure not to place the file in any sub folders and to also use the original USB cable for the transfer.
- The third step involves disconnecting the USB cable and rebooting your device into download mode. You can enter it by pressing the Volume Up key, the Menu Key and the Power ON key simultaneously after the device has been shut down.
- The second to last step is actually some cleaning that needs to be done so you will have to select the Wipe data/factory reset & Wipe Cache partition options in order to clear some important areas needed by the new custom ROM.
- The last step is the one that actually installs the Bezke UltraICS 4 ROM. All you need to do is select Install zip from sd card > Choose zip from sd card, and then choose the Bezke Ultra ICS Custom ROM Firmware Zip which you have placed in the root folder of the phone’s internal memory.
In the unlikely case you encounter problems during flashing you should follow the steps above again and re apply the firmware update. You can also do the same if you encounter the boot loop issue. In any case, you might want to restore an earlier nandroid backup before attempting to redo the steps above.
If everything has gone smoothly you can rest as you have successfully installed the Bezke UltraICS 4 ROM on your Samsung Galaxy S II and all that’s left now is to enjoy your new bit of software.
0 comments:
Post a Comment